Technical Articles - Page 11 of 12 - Wire & Cable India
Wire & Cable India

Category : Technical Articles

Technical Articles

Organomodified Siloxanes

wirecable
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// Ms. Kathrin Lehmann* Improved fire protection Flame-retardant plastics can save lives by delaying the spread of a fire, allowing valuable time for firefighting. But flame retardants based on metal hydroxide can achieve their full effect only if the right processing aids are used in the production of the flame-retardant......
Technical Articles

High-Speed PlasmaANNEALER for Stainless Steel and Nickel Alloy Wire, Tube and Rope

wirecable
Plasmait GmbH has introduced a second generation plasma annealer designed for wire, rope and tubes made of stainless steel and nickel alloys and with cross-sections from 20mm2 down to the smallest fine wire sizes. With this new second generation concept Plasmait allowed for a radical increase of continuous annealing speeds......
Technical Articles

Selection of EHV Power Cables

wirecable
Amitava Bose* Abstract In the past, transmission of power was predominantly through overhead lines. It was only in the last leg that underground power cables were used for distribution of power to the load distribution centre’s and consumers in the urban area. High voltage XLPE cable technology has rapidly advanced,......
Headlines Technical Articles

Fiber optic cables deployed in India’s longest natural gas pipeline

wirecable
With the world becoming more concerned about climate change, carbon dioxide emissions, and air quality, the focus on natural gas for electricity generation has increased as natural gas emits the least carbon dioxide per unit of energy produced. Natural gas also finds uses across residential, commercial, industrial and transportation sectors,......
Technical Articles

MV Power cable reliability trends – Moisture or Peroxide/Dry cure!!

wirecable
Introduction Initially after the start of the use of XLPE cables, there have been early / premature cable failures which lead the industry wide developments in manufacturing process, materials development and improvements and also material handling. It was identified that the contaminations, protrusion, electrical stress, moisture and/or water were responsible......
Technical Articles

Installation of OPGW cables for GETCO’s 220 kV Transmission Line

wirecable
Sterlite Technologies Limited (STL) undertook the challenge of supplying and installing of Optical Ground Wires (OPGW) on GETCO’s old 220kV transmission line in Kangashiyali, Gujarat. Critical attributes and challenges The most critical attribute of this project was that the OPGW was to be strung on 30 years old towers, which......
Technical Articles

Nexans’ innovative overhead line technology helps Brazil solve electricity transmission problems in its large cities

wirecable
July 3, 2012 Nexans has worked with Light, Rio de Janeiro’s electric utility, to develop the innovative Lo-Sag™ conductor to help solve Brazil’s crucial issue of supplying more electricity to its large urban centres*, where the construction of new overhead transmission lines is severely restricted and needs controlled clearance to......
Technical Articles

DuPont and cable industry collaboration yields safer, more durable cables

wirecable
DuPont Vamac ethylene acrylic elastomer (AEM) has been chosen by Huber + Suhner AG, Switzerland, a leading supplier of automotive cable systems, as insulation for battery cables supplied to Fiat, Ford, Jaguar, GM/Holden and Renault, and also as screened insulation cables for hybrid prototypes and the fully electric Tesla Roadster.......
Technical Articles

Thermoplastic Polyurethane (TPU) in Optical Fiber Cable Applications

wirecable
Sat Nistala, Larry Hewitt, Jacques Horrion and Santosh Mishra Thermoplastic polyurethanes (TPU) are a class of polyurethane plastics with many exceptional properties including elasticity, high tear strength, and resistance to oil, grease and abrasion. Technically, they are elastomers of linear segmented block copolymers composed of hard and soft segments. TPUs......
Technical Articles

Competitive Manufacturing Process for MV-XLPE Compounds for Power Cables: Myth v/s Reality

wirecable
Introduction There are several methods of Cross-linking of polyethylene .This article covers only two types of Cross-linked Polyethylene insulation as they constitute largest commercial application in LV & MV – power cable manufacturing. A. Peroxide XLPE: Peroxide-XLPE (for CCV) is a thermo set compound of LDPE produced by incorporating (a)......
WordPress Ads